Hp ProLiant DL360 G4p Server Manual de usuario descargar pdf (Pagina 50)

50 HP ProLiant DL360 Generation 4p Server User Guide

•

The server supports two hot-plug SCSI hard drives.

Each SCSI drive must have a unique ID. The system automatically sets all

SCSI IDs.

The SCSI ID for each hot-plug hard drive is set automatically to the next

sequential ID number in a series beginning with ID0.

If only one SCSI hard drive is used, install it in the bay with the lowest

number.

Hot-plug hard drives must be Ultra320 SCSI types. Mixing these types with

other drive standards degrades the overall performance of the drive

subsystem.

Drives must be the same capacity to provide the greatest storage space

efficiency when drives are grouped together into the same drive array.

Installing a SCSI or SATA Hard Drive

IMPORTANT: SATA hard drive LED functionality and hot-plug

capability are not supported currently.

1. Power down the server ("Powering Down the Server" on page 25).

2. Remove the existing hard drive blank or hard drive from the drive bay.

3. Install the hard drive.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 139 140

Sin comentarios

Hp ProLiant DL360 G4p Server Manual de usuario Pagina 50