Hp ProLiant DL360e Gen8 Server Manual de usuario Pagina 38
- Pagina / 114
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Hardware options installation 38
IMPORTANT: For additional installation and configuration information, see the documentation
that ships with the option.
To install the component:
1. Power down the server (on page 16).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
o Extend the server from the rack (on page 16).
o Remove the server from the rack (on page 17).
4. Remove the access panel (on page 18).
5. Remove the PCI riser cage (on page 19).
6. If you intend to use an FBWC module and capacitor pack, install these options now ("Installing the
FBWC module and capacitor pack" on page 38).
7. Install the storage controller ("Expansion board options" on page 59).
8. Install the PCI riser cage (on page 20).
9. Connect all necessary internal cables to the storage controller. For internal drive cabling information,
see "Storage cabling (on page 69)."
10. Install the access panel (on page 19).
11. Install the server into the rack ("Installing the server into the rack" on page 26).
12. Connect all necessary external cables to the storage controller. For more information on these cabling
requirements, see the documentation that ships with the option.
13. Power up the server (on page 16).
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
14. Install the drives ("Installing a hot-plug drive" on page 31).
For more information about the integrated storage controller and its features, select the relevant user
documentation on the HP website (http://www.hp.com/go/smartstorage/docs).
To configure arrays, see the HP Smart Storage Administrator User Guide on the HP website
(http://www.hp.com/go/smartstorage/docs).
Installing the FBWC module and capacitor pack
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website (http://www.hp.com/go/productbulletin).
CAUTION: In systems that use external data storage, be sure that the server is the first unit to be
powered down and the last to be powered back up. Taking this precaution ensures that the system
does not erroneously mark the external drives as failed when the server is powered up.
To install the component:
1. Power down the server (on page 16).
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Component identification 6
- Front panel LEDs and buttons 7
- Rear panel components 8
- Rear panel LEDs and buttons 8
- System board components 9
- Item Description 10
- DIMM slot locations 11
- System maintenance switch 11
- NMI functionality 11
- Drive numbering 12
- Drive LED definitions 12
- FBWC module LED definitions 13
- Fan locations 15
- Operations 16
- Remove the access panel 18
- Install the access panel 19
- Remove the PCI riser cage 19
- Install the PCI riser cage 20
- Optimum environment 21
- Temperature requirements 22
- Power requirements 23
- Server warnings and cautions 24
- Rack warnings 25
- Installing hardware options 26
- Registering the server 28
- Introduction 29
- Security bezel option 29
- Front video adapter option 29
- Drive options 30
- Installing a hot-plug drive 31
- Drive cable options 32
- Mini-SAS cable option 34
- Mini-SAS Y-cable option 35
- Controller options 37
- Optical drive option 41
- Hot-plug fan module option 43
- Fan population guidelines 44
- Memory options 47
- HP SmartMemory 48
- DIMM identification 49
- Memory protection modes 50
- Memory population guidelines 51
- Installing a DIMM 53
- Processor option 54
- Expansion board options 59
- GPU power cable option 60
- Cabling 69
- Eight-bay SFF drive cabling 71
- Optical drive cabling 75
- GPU power cabling 76
- Server mode 77
- HP product QuickSpecs 77
- HP iLO Management 77
- Active Health System 78
- Intelligent Provisioning 79
- HP Insight Diagnostics 80
- HP Service Pack for ProLiant 81
- HP ROM-Based Setup Utility 81
- Using RBSU 82
- Auto-configuration process 82
- Boot options 83
- Configuring AMP modes 83
- Utilities and features 84
- ROMPaq utility 85
- Automatic Server Recovery 85
- USB support 85
- Redundant ROM support 85
- Keeping the system current 86
- ProLiant servers 87
- Troubleshooting 88
- System battery replacement 89
- Regulatory information 91
- Electrostatic discharge 92
- Specifications 93
- Specification Value 94
- Support and other resources 98
- Customer Self Repair 100
- Reparo feito pelo cliente 102
- Acronyms and abbreviations 106
- Documentation feedback 110
- Index 111 111
- Index 112 112
- Index 113 113
- Index 114 114
Relacionado con productos y manuales para Hardware De La Computadora Hp ProLiant DL360e Gen8 Server
(484 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.040 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales