Hp ProLiant DL360e Gen8 Server Manual de usuario descargar pdf (Pagina 61)

Hardware options installation 61

Before installing a high-power GPU in the server, be sure that the power supplies support the installation of

the card. Because of the high power requirements for the card, a 750-W or higher power supply may be

required. For more information, see the HP Enterprise Configurator website

(http://h30099.www3.hp.com/configurator/).

For more information on estimation of power consumption and proper selection of components, see the HP

Power Advisor website (http://www.hp.com/go/hppoweradvisor).

For more information about product features, specifications, options, configurations, and compatibility, see

the product QuickSpecs on the HP Product Bulletin website (http://www.hp.com/go/productbulletin).

To connect the cable option:

1. Power down the server (on page 16).

2. Remove all power:

a. Disconnect each power cord from the power source.

b. Disconnect each power cord from the server.

3. Do one of the following:

o Extend the server from the rack (on page 16).

o Remove the server from the rack (on page 17).

4. Remove the access panel (on page 18).

5. Remove the PCI riser cage (on page 19).

6. Remove the existing bracket from the GPU.

7. Install the GPU. For more information, see the documentation that ships with the GPU option.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 113 114

Sin comentarios

Hp ProLiant DL360e Gen8 Server Manual de usuario Pagina 61