Hp ProLiant DL360e Gen8 Server Manual de usuario descargar pdf (Pagina 41)

Hardware options installation 41

Optical drive option

For more information about product features, specifications, options, configurations, and compatibility, see

the product QuickSpecs on the HP Product Bulletin website (http://www.hp.com/go/productbulletin).

To install the component:

1. Power down the server (on page 16).

2. Remove all power:

a. Disconnect each power cord from the power source.

b. Disconnect each power cord from the server.

3. Do one of the following:

o Extend the server from the rack (on page 16).

o Remove the server from the rack (on page 17).

4. Remove the optical drive blank.

Retain the blank for future use.

5. Remove the access panel (on page 18).

6. Remove the PCI riser cage (on page 19).

7. If you are installing the optical drive in an LFF drive model, do the following:

a. Thread the optical drive cable through the optical drive bay.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 113 114

Sin comentarios

Hp ProLiant DL360e Gen8 Server Manual de usuario Pagina 41