
Cabling 96
10.
Disconnect the SATA cable from the optical drive and the SATA connector on the system board. The
optical bay is disabled with the chipset SATA cable option.
11. Connect the chipset SATA cable:
a. Connect the chipset SATA cable connector to the chipset SATA controller port on the system board.
The chipset SATA connector on the SATA cable is narrower than the chipset SATA controller port
header on the system board.
b. Connect the remaining chipset SATA cable connector to the SATA header on the hard drive cage.
12. Coil the cables behind the hard drive backplane to minimize airflow impact.
13. Install the fan cage ("Remove the fan cage" on page 26).
14. Install the air baffle ("Remove the air baffle" on page 34).
15. Install the PCIe riser cage ("Install the primary PCIe riser cage" on page 31), if removed.
16. Do one of the following:
o Secure the primary PCIe riser cage full-length expansion board retainer (on page 32).
Comentarios a estos manuales