Hp ProLiant DL585 G2 Server Manual de usuario descargar pdf (Pagina 51)

Hardware options installation 51

Install the battery pack into the server.

10. Route the cable, and connect it to the cache module.

NOTE: After installing a battery pack, you might see a POST message during reboot

indicating that the array accelerator (cache) is temporarily disabled. This is normal, because

the new battery pack is likely to have a low charge. You do not need to take any action,

because the recharge process begins automatically when the battery pack is installed. The

controller will operate properly while the battery pack recharges, although the performance

advantage of the array accelerator will be absent. When the battery pack has been charged

to a satisfactory level, the array accelerator will automatically be enabled.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 103 104

Sin comentarios

Hp ProLiant DL585 G2 Server Manual de usuario Pagina 51