Hp ProLiant MicroServer Manual de usuario Pagina 12

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 94
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 11
Hardware options installation 12
Removal and replacement tools
In performing any hardware configuration procedures, you might need the following items:
System screwdriver (secured to the front panel door)
All hardware screws used in the server can be removed or fastened by using the system screwdriver.
Spare screws, located on the back side of the front panel door.
The following references and software tools might also be used:
IPMI Event Log
Diagnostics software
Server warnings and cautions
WARNING: To reduce the risk of personal injury from hot surfaces, allow drives and internal
system components to cool before touching them.
CAUTION:
achieved when the system covers are removed.
CAUTION: When installing hardware or performing maintenance procedures requiring access
to internal components, HP recommends that you first back up all server data to avoid loss.
Vista de pagina 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 93 94

Comentarios a estos manuales

Sin comentarios