Hp ProLiant XL220a Gen8 v2-Server Manual de usuario descargar pdf (Pagina 12)

Operations 12

Operations

Power down the server

Before powering down the server for any upgrade or maintenance procedures, perform a backup of critical

server data and programs.

IMPORTANT: When the server is in standby mode, auxiliary power is still being provided to the

system.

To power down the server, use one of the following methods:

• Press and release the Power On/Standby button.

This method initiates a controlled shutdown of applications and the OS before the server enters standby

mode.

• Press and hold the Power On/Standby button for more than 4 seconds to force the server to enter

standby mode.

This method forces the server to enter standby mode without properly exiting applications and the OS.

If an application stops responding, you can use this method to force a shutdown.

• Use a virtual power button selection through iLO 4.

This method initiates a controlled remote shutdown of applications and the OS before the server enters

standby mode.

Before proceeding, verify the server is in standby mode by observing that the system power LED is amber.

Removing a drive blank

Remove the component as indicated.

CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless

all bays are populated with either a component or a blank.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 73 74

Sin comentarios

Hp ProLiant XL220a Gen8 v2-Server Manual de usuario Pagina 12