Hp ProLiant XL220a Gen8 v2-Server Manual de usuario Pagina 14
- Pagina / 74
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Operations 14
Remove the processor air baffle
1. Power down the server (on page 12).
2. Disconnect all peripheral cables from the server.
3. Remove the server (on page 13).
4. Remove the processor air baffle.
Remove the PCI riser board assembly
1. Power down the server (on page 12).
2. Disconnect all peripheral cables from the server.
3. Remove the server (on page 13).
4. Place the server on a flat, level work surface.
5. Disconnect all cables connected to existing expansion boards.
IMPORTANT: Both T-10 and T-15 screws are required for this procedure. When replacing the
component, be sure to install the screws in the proper location. Failure to do so will cause the
server to not install properly into the chassis.
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Component identification 6
- Front panel LEDs and buttons 7
- System board components 8
- DIMM slot locations 9
- System maintenance switch 9
- Drive numbering 10
- Operations 12
- Remove the drive 13
- Remove the server 13
- Operations 16 16
- Install the server 18
- Operations 19 19
- Powering up the chassis 21
- Registering the server 22
- Introduction 23
- Processor option 23
- Memory options 26
- DIMM identification 27
- ECC memory 28
- Installing a DIMM 28
- Drive guidelines 30
- Installing a hot-plug drive 30
- Controller options 31
- Server mode 38
- Product QuickSpecs 38
- HP iLO Management 38
- Active Health System 39
- Intelligent Provisioning 40
- Erase Utility 41
- HP Insight Online 42
- HP Service Pack for ProLiant 43
- HP ROM-Based Setup Utility 43
- Using RBSU 44
- Auto-configuration process 44
- Boot options 45
- Configuring AMP modes 45
- Utilities and features 46
- ROMPaq utility 47
- Automatic Server Recovery 48
- USB support 48
- Redundant ROM support 48
- Keeping the system current 49
- ProLiant servers 50
- Troubleshooting 51
- Cabling 52
- SUV cable connectors 53
- Item Connector Description 54
- Regulatory information 55
- Warranty information 56
- Electrostatic discharge 57
- Specifications 58
- Support and other resources 59
- Customer Self Repair 61
- Reparo feito pelo cliente 63
- Acronyms and abbreviations 67
- Version Control Agent 70
- Documentation feedback 71
- Index 72 72
- Index 73 73
- Index 74 74
Relacionado con productos y manuales para Hardware De La Computadora Hp ProLiant XL220a Gen8 v2-Server
(129 paginas)Canon EF-M 22mm f/2 STM manuály
Uživatelské manuály a uživatelské příručky pro DVD přehrávače Canon EF-M 22mm f/2 STM.
Poskytujeme manuály pdf Canon EF-M 22mm f/2 STM ke stažení zdarma podle typů dokumentů:
Comentarios a estos manuales