Hp ProLiant XL220a Gen8 v2-Server Manual de usuario Pagina 30

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 74
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 29
Hardware options installation 30
Drive guidelines
When adding drives to the server, observe the following general guidelines:
The system automatically sets all device numbers.
If only one drive is used, install it in the bay with the lowest device number ("Drive numbering" on page
10).
To provide the greatest storage space efficiency when drives are grouped together into the same drive
array, drives must be the same capacity.
Installing a hot-plug drive
1. Remove the drive blank.
2. Prepare the drive.
3. Install the drive.
4. Determine the status of the drive from the drive LED definitions ("Hot-plug drive LED definitions" on page
10).
Vista de pagina 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 73 74

Comentarios a estos manuales

Sin comentarios