HP SmartStream Print Controller for HP Designjet T3500 Production eMFP Manual de usuario descargar pdf (Pagina 14)

4. Click the Printers tab.

5. Click the Add Printer button.

6. You can give the printer a name (this is optional) and enter its IP address or hostname (this is required),

then press Continue. If you assign a name, you can choose any name you like; it will be used only in the

printers pane. If you do not know the printer’s IP address, the printer’s own documentation will tell you how

to nd it. It is normally available from the Connectivity menu in the printer’s front panel.

NOTE: You can change the IP address or hostname later in the printer preferences. See Printer-specic

preferences on page 14.

NOTE: Only supported printers are detected (see the installation guide), and only licensed printers can be

added to the application; any attempt to add an unlicensed printer will fail, unless you have a trial version

of the software (see the installation guide).

7. The application downloads a set of color proles for the new printer.

The name you have given the new printer should now appear in the printers pane.

You can add more printers, in which case their names all appear in the printers pane.

Change a printer’s IP address or hostname

If the IP address of a printer changes, it is removed from HP SmartStream. To add it again with the new IP

address, see Add a printer on page 7.

8 Chapter 2 Printers ENWW

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 82 83

Sin comentarios

HP SmartStream Print Controller for HP Designjet T3500 Production eMFP Manual de usuario Pagina 14