HP Firewall Series Manual de instalación descargar pdf (Pagina 45)

Power input

Table 17 Power input specifications

Remarks

Item

A-F1000-A-EI/A-F1000-S-EI

Rated voltage range

100 to 240 VAC; 50/60 Hz

Maximum input current

2 A

Maximum output power

150 W

Rated voltage range

–48VDC to –60VDC

Maximum input current 6 A

Maximum output power 150 W

NOTE:

No AC power supply or DC power supply is provided with the firewall.

Console port

The A-F1000-A-EI/A-F1000-S-EI firewall provides an RS-232 asynchronous serial console port that can

be connected to a computer for system debugging, configuration, maintenance, management, and host

software loading.

Table 18 Technical specifications for the console port

Item Specification

Connector RJ-45

Compliant standard RS-232

Baud rate

9600 bps to 115200 bps

9600 bps (default)

Transmission distance 15 m (49.21 ft)

Services

• Provides connection to an ASCII terminal

• Provides connection to the serial port of a local PC to run the terminal emulation

program

• Command line interface (CLI)

Combo interfaces

An A-F1000-A-EI/A-F1000-S-EI firewall provides 12 combo interfaces. Each combo interface contains a

copper Ethernet port and a fiber SFP port, and can work either as a copper port or fiber port. Only one

of the fiber port and copper port that form a combo interface can work at a time. By default, a combo

interface works as a copper port.

You can use the combo enable { copper | fiber } command in interface view to activate the copper port

or fiber port of the combo interafce.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 59 60

Sin comentarios

HP Firewall Series Manual de instalación Pagina 45