HP 5000 Router Series Manual de instalación Pagina 10

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 62
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 9
8 CHAPTER 1: INTRODUCING THE ROUTER 5000 FAMILY
Tabl e 7 describes the LEDs on the Router 5232, 5642, 5682 routers.
Router 5012 Hardware The Router 5012 can function as a small-sized access router by connecting to a
leased line or Public Switched Telephone Network (PSTN) through asynchronous
serial ports.
The Router 5012 has four fixed ports and three slots.
Figure 1 illustrates the front of the Router 5012.
SLOT 1-3 ON-The MIM the SIC is powered and
operating normally.
OFF-No module is installed in the current slot
or the module is not operating normally.
Tab le 7 Router 5232, 5642, 5682 LEDs
POWER ON — The module (MIM or SIC) is operating
normally.
OFF — No module is installed in the current
slot or the MIM is not operating normally.
SYSTEM Flashing-unit is operating normally
OFF-power is Off
READY ON-Module found in particular slot
OFF-No module found in particular slot
ACTIVE Flashing-Data is being transmitted by module
in corresponding slot
OFF-no data is being transmitted in
corresponding slot
OFF — The module in the corresponding slot
is running abnormally or no module is
installed.
ACTIVE
(not on Router 5012) Data transmission LED
Flashing green — Data is being transmitted by
the module in the corresponding slot.
OFF — No data is being transmitted by the
module in the corresponding slot.
SERIAL0 (Router 5012 only)
Fixed serial port LED — Shows the status of
data that is transmitting on the serial ports.
OFF — No data is being transmitted.
Flashing green — Data is being transmitted. ETHERNET0/LAN
Fixed Ethernet port LED — Shows the status of
data transmission on the fixed Ethernet port.
OFF — No data is being transmitted.
Flashing green — data is being transmitted. SYSTEM
Hardware system operating LED Flashing green — The system is operating
normally.
ON or OFF — The system is operating
abnormally.
POWER
System power LED ON — Power is on.
OFF — Power is off.
Vista de pagina 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 61 62

Comentarios a estos manuales

Sin comentarios