HP 5000 Router Series Manual de instalación descargar pdf (Pagina 9)

Router 5000 Family Hardware 7

Table 4 lists the attributes of the Router 5000 Family AUX port.

Table 5 lists the attributes of the Router 5000 Family Ethernet port.

Power Supply and

Protection Ground

Table 6 lists specifications for the Router 5000 Family power supply and protection

ground.

LEDs Table below describes the LEDs on the Router 5012

Tab le 4 Router 5000 Family AUX Port Specifications

Attribute Description

Connector type RJ-45

Interface standard Asynchronous EIA/TIA-232

Baud rate 300 to 115.2 kbps

Services supported Modem dial-up

Backup Operating as the console port when the CON

fails

Protocols supported PPP

SLIP MP

Tab le 5 Router 5000 Family Ethernet Port Specifications

Attribute Description

Connector type RJ-45

Interface type MDI

Frame format supported Ethernet _ II

Ethernet _ SNAP IEEE 802.2

IEEE 802.3 Operating mode

10/100BASE-T Mbps autosensing Full duplex/half duplex

Network protocol supported IP, Novell IPX

Tab le 6 Router 5000 Family Power Supply and Protection Ground

Item Description

Power supply input Rated Voltage: 100-240V, a.c. 50/60Hz

Max. voltage 90-264V a.c.50/60Hz

Protection ground Connecting to ground through ground wire.

POWER ON — The module (MIM or SIC) is operating

normally.

OFF — No module is installed in the current

slot or the MIM is not operating normally.

SYSTEM Flashing-unit is operating normally

OFF-power is Off

WAN Flashing-data is being transmitted from local

WAN port

OFF-no data transmitted on WAN port

LAN Flashing-Data is being transmitted on local

Ethernet port

OFF-no data is being transmitted on local

Ethernet port

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 61 62

Comentarios a estos manuales

Sin comentarios

HP 5000 Router Series Manual de instalación Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Redes HP 5000 Router Series