HP EliteDesk 800 G1 Base Model Small Form Factor PC Manual de usuario descargar pdf (Pagina 15)

– Dynamic DNS Update: Disabled (Recommended setting; default)

If Dynamic DNS (DDNS) update is enabled, the firmware will actively try to register its IP addresses and FQDN in DNS

using DDNS update protocol. You must set the appropriate host and domain names; in addition, the MEBx menu

displays the following options:

• Periodic Update Interval: Specify a time from 20 to 1,440 minutes

• TTL (time-to-live): Specify a time in seconds

If DDNS update is disabled, the firmware will make no attempt to update DNS using DHCP option 81 or DDNS update

protocol.

If DDNS update has not been set (that is, it is neither enabled nor disabled), the firmware will use DHCP option 81 for

DNS registration; it will not directly update DNS using DDNS update protocol.

15. At the Intel ME Network Setup menu (Figure 9), select TCP/IP Settings. The TCP/IP Settings screen appears, as shown in

Figure 11.

Intel AMT 9.x supports Internet Protocol version 4 (IPv4) and IPv6 interfaces, which are set up differently:

– IPv4: See Configuring IPv4.

– IPv6: The IPv6 option has been removed from the MEBx in Intel AMT 9.x. IPv6 (wired or wireless

) can be configured

from an SCS or the WebUI. See Configuring IPv6.

Figure 11. Configuring TCP/IP settings

Wireless Intel AMT support is not provided on HP Workstation PCs.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 42 43

Sin comentarios

HP EliteDesk 800 G1 Base Model Small Form Factor PC Manual de usuario Pagina 15