HP EliteDesk 800 G1 Base Model Small Form Factor PC Manual de usuario descargar pdf (Pagina 17)

Configuring IPv6

Both wired and wireless

IPv6 can be enabled via an SCS or, as in this example, the WebUI.

Review the TCP/IPv6 settings for wired and wireless connections, as shown in Figure 13:

– Enable IPv6 (wired): Enabled (Recommended setting; default setting is Disabled)

– Enable IPv6 (wireless): (Implementation-dependent; default setting is Disabled)

Figure 13. Configuring wired and wireless networks for IPv6 via the WebUI

Implementing wireless connectivity for Intel AMT

Consider the following caveats:

– For desktop PCs, wireless Intel AMT is supported on EliteDesk 800 G1 Ultra Slim, Small Form Factor, and Microtower

systems, and EliteOne 800 G1 All-in-One systems using the Intel Centrino Advanced-N 6205 mini PCI wireless LAN

card or the add-on PCI Express x1 option card with Intel Centrino Advanced-N 6205.

– For business notebook PCs, wireless Intel AMT is supported on Intel Centrino Advanced-N 6205/6235 and Intel Dual

Band Wireless-N 7260 802.11 adapters, and Intel Dual Band Wireless-AC 7260 802.11a/b/g/n/ac adapters; wired

Intel AMT is supported on Integrated Intel 1217LM and 1218LM Gigabit Network Connection.

– Intel AMT only supports DHCP and does not support static IP addresses.

– Wired and wireless Intel AMT traffic cannot travel on the same subnet concurrently.

Wireless Intel AMT support is not provided on HP Workstation PCs.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 42 43

Sin comentarios

HP EliteDesk 800 G1 Base Model Small Form Factor PC Manual de usuario Pagina 17