HP X Unified Security Platform Series Guía de usuario descargar pdf (Pagina 66)

Chapter 3. Command Reference

58 X Family CLI Reference V 2.5.1

before a problem occurs. A critical threshold should be set to a value to warn you before a

problem causes damage.

disk [-major <60-100>] [-critical <60-100>]

sets the threshold for warnings about the disk usage of the device hard disk.

memory [-major <60-100>] [-critical <60-100>]

sets the threshold for device memory usage warnings.

temperature [-major <40-80>] [-critical <40-80>]

sets the threshold for device temperature warnings.

conf t nms

The configure terminal nms command sets the trap IP address, trap port, and SNMP community

string for a Network Monitoring System (NMS). The NMS community string is separate from the

string used by SMS. conf t no nms turns off the NMS options for the system.

community NMS-community-string

sets the NMS community string, 1-31 characters.

no nms

turns off the NMS options for the system.

trap-destination <add | remove > ip [port trap-port]

adds or removes a trap IP address and trap port of the NMS.

conf t notify-contact contact-name agg-period

The configure terminal notify-contact command sets the aggregation period of a notification

contact. You must enter a name of an existing notification contact and aggregation period (in minutes)

for the entry.

In this example, the management console aggregation period is set to 2 minutes.

hostname# conf t notify-contact "Management Console" 2

conf t ntp

The configure terminal ntp command configures the NTP settings for the device.

disable

turns off NTP timekeeping.

CAUTION: Short aggregation periods increase system load and can significantly affect

system performance. In the event of a flood attack, a short aggregation period can lead to

system performance problems.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 141 142

Sin comentarios

HP X Unified Security Platform Series Guía de usuario Pagina 66