HP X Unified Security Platform Series Guía de usuario descargar pdf (Pagina 75)

configure

X Family CLI Reference V 2.5.1 67

enable remote

deployment

Use conf t sms remote-deploy to enable configuration of the device by a remote SMS. In the first

example, the device will be configured by the SMS with the IP address 111.222.34.200:

hostname# conf t sms remote-deploy 111.222.34.200

In the next example, configuration by primary and secondary SMS devices is enabled. The primary

SMS IP address is 111.222.34.200, and the secondary SMS IP address is 111.222.34.201:

hostname# conf t sms remote-deploy 111.222.34.200 111.222.34.201

disable sms

management

Use conf t no sms command to turn off SMS management of the device.

hostname# conf t no sms

conf t tse

The configure terminal tse command configures settings for the Threat Suppression Engine (TSE).

adaptive-filter mode [automatic | manual]

sets the adaptive filter mode to automatic or manual for the TSE.

afc-severity [critical | error | warning | info]

sets the severity of messages logged by the Adaptive Filter Configuration (AFC).

connection-table timeout <30-1800>

defines the global connection table timeout in seconds. The range is 30 to 1800 seconds.

logging-mode conditional [-threshold nn.n] [-period seconds]

enables improved performance by turning off alert/block logging when the device

experiences a specified amount of congestion. This feature is enabled by default.

The -threshold setting configures the percentage of packet loss that turns off logging. The

-period setting configures the amount of time logging remains off.

logging-mode unconditional

enables logging even when traffic is dropped under a high load. This command disables the

threshold option for disabling alert and block logging when a specified amount of congestion

passes through the device.

quarantine duration minutes

specifies the length of time for which a host will remain on the quarantine list when it is

identified by the device, SMS, or an administrator as having a security issue.

conf t user

The configure terminal user command configures user accounts. All users can change their own

passwords, but the majority of the command functionality is limited to super-users. This command is

enabled even when the SMS manages the device.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 141 142

Sin comentarios

HP X Unified Security Platform Series Guía de usuario Pagina 75