
40
xSeries 240 / Netfinity 5600 Internal SCSI Cabling
The xSeries 240 and Netfinity 5600 contain a backplane supporting six hot-swap drive bays. The backplane is connected to the integrated dual channel, wide Ultra2
SCSI controller connector through a 16-bit LVD SCSI cable. If internal RAID support is required, this cable can be used to connect to a supported RAID adapter rather
than the integrated SCSI controller. A two-drop, 16-bit SCSI cable with integrated terminator is also included with the server to support up to two internal removable
media devices. This cable can be attached to the integrated SCSI controller if a RAID adapter is used to support the internal hot-swap drive bays. It can also be used
to attach to a supported SCSI adapter if the integrated Ultra2 SCSI controller is utilized for the hot-swap bays. The second channel is available
through an industry-standard 0.8mm Very High Density Connector Interface (VHDCI) located on the rear panel for external use.
Bay Form
Factor
Height Front
Access
Usage P / N Description RPM Height Bays
Supported
Max
Qty
A
133mm
(5.25in)
HH
1
Ye s O p e n
Ultra160 Hard Disk Drives (HDD)
1
B
133mm
(5.25in)
HH
1
Ye s Open 37L7201 9.1GB Ultra160 SCSI Hot-Swap SL HDD 7200 SL C ... H 6
-
133mm
(5.25in)
HH Yes
IDE CD-
ROM
37L7202 18.2GB Ultra160 SCSI Hot-Swap SL HDD 7200 SL C ... H 6
-
89mm
(3.5in)
SL Ye s Diskette 37L7203 36.4GB Ultra160 SCSI Hot-Swap SL HDD 7200 SL C ... H 6
C ... H HS SL
2
Ye s O p e n 37 L 7 2 0 4
9.1GB 10K-4 Ultra160 SCSI Hot-Swap SL
HDD
10,000 SL C . .. H 6
1. Two half-high (HH) bays can be combined to support a single full-
high (FH) device
2. Two slim-line (SL) bays can be combined to support a single half-
high (HH) device.
37L7205
18.2GB 10K-4 Ultra160 SCSI Hot-Swap SL
HDD
10,000 SL C ... H 6
37L7206
36.4GB 10-K Ultra160 SCSI Hot-Swap SL
HDD
10,000 SL C . .. H 6
19K0655
9.1GB 15K-rpm Ultra160 SCSI Hot-Swap
HDD
15,000 SL C ... H 6
19K0656
18.2GB 15K-rpm Ultra160 SCSI Hot-Swap
HDD
15,000 SL C ... H 6
Associated Options
10K2340 Media Bay Tray and LVD Cable Kit
2
-- A+B1
Ext Storage Expansion Units
3
Form Factor
35311RU EXP300 Storage Expansion Unit
4
Rack (3U)
09N7296 EXP300 Rack-to-Tower Conversion Kit -
35601RU FAStT EXP500 Storage Expansion Unit
5
Rack (3U)
35421RU FAStT200 Storage Server
6, 7
Rack (3U)
35422RU FAStT200 HA Storage Server
6
Rack (3U)
19K1121 FAStT200 Redundant RAID Controller -
1. xSeries 240 / Netfinity 5600 contains an Ultra2 hot-swap backplane which limits Ultra160 HDDs to Ultra2 bus
speeds.
2. Media Bay Tray and LVD Cable Kit (P/N 10K2340) contains a two-drop terminated LVD SCSI cable and the
hardware required to convert two half-high 5.25in removable media bays into two nonhot-swap 7200RPM HDD bays.
3. Not supported by the onboard external SCSI port. To configure a SCSI storage device, select an optional SCSI
controller then refer to Appendix D: Cables - Storage Units - Controllers to confirm the controller supports the
desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit options,
see the specific expansion unit section. For Fibre Channel storage devices, refer to the Fibre Array Solutions section.
4. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies, each with its
own power cord. To convert an EXP300 to a tower form factor, Netfinity EXP300 Rack-to-Tower Conversion Kit (P/N
09N7296) is required.
5. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-swap 350W power supplies, each with
its own power cord.
6. The FAStT200 includes two hot-swap, 350W auto-ranging redundant power supplies, each with its own power
cord.
7. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller
(P/N 19K1121).
B
CD-ROM
Diskette
Hot-Swap
(HS)
A
Removable Media (RM)
E
C
F
G
H
D
A
B
CD-ROM
Diskette
Removable Media (RM)
ower Model
Rack Model View
For clarity purposes, bay labels in
these diagrams are for reference
by the accompanying tables and
are not the actual labels. Refer to
the documentation shipped with
the system for further details on
actual labels.
C
D
E
F
G
H
Comentarios a estos manuales