HP LH4r - NetServer - 256 MB RAM Información técnica descargar pdf (Pagina 94)

For the latest product & technical information, refer to the Information Sources on pages 2 and 3.

Updated 03/22/01

IBM NETFINITY 7100

Netfinity 7100 Internal SCSI Cabling

The Netfinity 7100 contains a DASD backplane supporting 10 hot-swap, SCA-2 compliant drive bays. The backplane is connected to Channel B of the integrated

dual-channel, Wide Ultra2 SCSI controller through a 16-bit LVD SCSI cable. Channel A only supports external SCSI attachment and is cabled directly to the external

0.8mm VHDCI SCSI connector. To support devices in the internal 133/89mm (5.25/3.5in) half-high bays, a two-drop, 16-bit LVD SCSI cable with integrated terminator

is included with the server. This cable can be used to connect to an optional SCSI adapter or, in the case of RAID configurations where the backplane cable is

attached to an optional RAID adapter, it can be connected to the Channel B connector.

Bay Form

Factor

Height Front

Access

Usage Part

Number

Description RPM Height Bays

Supported

Max

Qty

89mm

(3.5in)

SL Yes Diskette

Ultra160 Hard Disk Drives (HDD)

133mm

(5.25in)

HH Ye s

IDE CD-

ROM

37L7201

9.1GB Ultra160 SCSI Hot-Swap

SL HDD

7200 SL See diagram 10

RM 1

133mm

(5.25in)

Ye s O p e n 3 7 L 7 2 0 2

18.2GB Ultra160 SCSI Hot-Swap

SL HDD

7200 SL See diagram 10

RM 2

133mm

(5.25in)

Ye s Open 37L7203

36.4GB Ultra160 SCSI Hot-Swap

SL HDD

7200 SL See diagram 10

1 . . . 10

1 ... 7

HS SL or HH

Ye s O p e n 3 7L 7 2 0 4

9.1GB 10K-4 Ultra160 SCSI Hot-

Swap SL HDD

10,000 SL See diagram 10

NB3

19in Rack 3U Ye s Open 37L7205

18.2GB 10K-4 Ultra160 SCSI Hot-

Swap SL HDD

10,000 SL See diagram 10

1. Two half-high (HH) bays can be combined to support a single full-

high (FH) device.

2. The top bay is HH; all others are configured in groups of three SL

bays. When a HH drive is installed in one of these groups, only another

HH or a single SL drive can be installed in the same group. For clarity,

the SCSI IDs are identified.

3. Tower configured systems support installation of up to three

NetBAY3s. See IBM Netfinity NetBAY3 Stackable Enclosure section for

supported devices.

37L7206

36.4GB 10K-4 Ultra160 SCSI Hot-

Swap SL HDD

10,000 SL See diagram 10

19K0655

9.1GB 15Krpm Ultra160 SCSI Hot-

Swap HDD

15,000 SL See diagram 10

19K0656

18.2GB 15Krpm Ultra160 SCSI

Hot-Swap HDD

15,000 SL See diagram 10

External Storage

Expansion Units

Form Factor

35311RU EXP300 Storage Expansion Unit

Rack (3U)

09N7296

EXP300 Rack-to-Tower

Conversion Kit

35601RU

FAStT EXP500 Storage Expansion

Unit

Rack (3U)

35421RU FAStT200 Storage Server

5, 6

Rack (3U)

35422RU FAStT200 HA Storage Server

Rack (3U)

19K1121

FAStT200 Redundant RAID

Controller

1. Netfinity 7100 contains an Ultra2 hot-swap backplane which limits Ultra160

HDDs to Ultra2 bus speeds.

2. Not supported by the onboard external SCSI port. To configure a SCSI

storage device, select an optional SCSI controller then refer to Appendix D:

Cables - Storage Units - Controllers to confirm the controller supports the

desired External Storage Expansion Unit and to select a supported cable. For

HDD or other expansion unit options, see the specific expansion unit section.

For Fibre Channel storage devices, refer to the Fibre Array Solutions section.

3. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W

power supplies, each with its own power cord. To convert an EXP300 to a tower

form factor, Netfinity EXP300 Rack-to-Tower Conversion Kit (P/N 09N7296) is

required.

4. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-

swap 350W power supplies, each with its own power cord.

5. The FAStT200 includes two hot-swap, 350W auto-ranging redundant power

supplies, each with its own power cord.

6. Can be upgraded to FAStT200 HA Storage Server through the addition of a

FAStT200 Redundant RAID Controller (P/N 19K1121).

Diskette

Bay 1

CD-ROM

Bay 2

Removable

Media (RM)

Bays

Hot-Swap (HS)

Bays 10 x SL

-or-

7 x HH

(SCSI IDs

shown)

Netfinity NetBAY3 (NB3)

(Optional on Tower Configurations)

1. The top bay is HH; all others are configured in groups of three SL

bays. When a HH drive is installed in one of these groups, only another

HH or a single SL drive can be installed in the same group. For clarity,

the SCSI IDs are identified.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 157 158

Comentarios a estos manuales

Sin comentarios

HP LH4r - NetServer - 256 MB RAM Información técnica Pagina 94

Comentarios a estos manuales

Relacionado con productos y manuales para Barebones Pc / Estación De Trabajo HP LH4r - NetServer - 256 MB RAM