HP Access Control Guía de inicio rápido descargar pdf (Pagina 39)

IMPORTANT: Configuration at a device occurs in order, starting at the top of the Configure window list. This

means the FDT workflow is always configured last on a device.

Right-click a device to display a dropdown menu of possible actions.

Figure 5-3 Devices dropdown menu

NOTE: The dropdown menu options may vary, depending on the type of device and the configured

components on the device.

●

Click Go to printer EWS to go to the device’s Embedded Web Server page.

●

Click Update selected to refresh the device data.

●

Click Test trap to test a device with the Confirmation traps component enabled.

●

Click Reboot device to restart an XT device.

●

Click Reset to factory settings to remove all configurations on an XT device.

●

Click Generate QR code to create a QR code for the printer. In the QR Code window, QR code data,

selected in the Settings tile > SPPE tab, displays. Print a QR code to display on single-function printers

if you want users to detect the printer with the HP Mobile Release mobile app. For more information

about HP Mobile Release, see the HP Access Control (HP AC) Secure Pull Print Express Admin Guide.

●

Click Enable OXPd 1.6 and reboot device to enable OXPd 1.6 on HP non-FutureSmart LaserJet multi-

function printers. This is to allow the HP AC Express button to display on the front panel for pull

printing. If OXPd 1.6 is not enabled on the device, pull printing cannot be configured and a "OXPd 1.6 is

not enabled" message displays. The Enable OXPd 1.6 and reboot device menu item displays even if

OXPd 1.6 is already enabled on the device.

Figure 5-4 QR code

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 70 71

Sin comentarios

HP Access Control Guía de inicio rápido Pagina 39