HP Access Control Guía de inicio rápido Pagina 67
- Pagina / 71
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
5.12 Configure XT devices
Prerequisites:
●
Agent and Secure Pull Print Express must be installed on the server.
●
Make sure the XT device is connected to a printer and to the network.
●
If your server has a firewall, make sure TCP 2000 is open to send configuration files.
●
If your server has a firewall, make sure UDP 11000 port is open for device discovery.
●
Make sure the IRM authentication method is set to Card Only.
●
Make sure the IRM Proximity Reader settings and Card settings are correct. Also, make sure Card ID
masking is enabled.
NOTE: After the card type configuration changes, the XT device must be rebooted or power cycled. To
power cycle the XT device, unplug the power cord from the device and then re-plug the power cord.
Follow the steps below:
1. Select the XT device from the device list, then click Configure.
2. In the Configure window, select Pull printing. Click OK.
The device reboots and then beeps five times, indicating the device is configured.
5.12.1 Pull print using XT card readers
Prerequisites:
●
The XT device is connected to a printer and the network.
●
The XT device is configured.
●
Cards are registered to users.
Follow the steps below:
1. Present your registered card at the XT card reader. The XT device identifies the registered card,
authenticates the user, and locates your stored jobs in the spool folder. All of your stored jobs are then
pulled from the spool folder, printed, and then deleted.
2. Collect your printed documents.
Section 5.12 Configure XT devices 59
- HP Access Control (HP AC) 1
- Table of contents 3
- List of tables 5
- List of figures 6
- 1Introduction 9
- 2 Prerequisites 10
- 3 License tile 12
- 4 Settings tile 13
- 4.2 Device tab 14
- 4.3 Email tab 17
- 4.4 IIS tab 19
- 4.5 SPPE tab 23
- 4.6 SPP Enterprise tab 25
- 4.7 Alias tab 29
- 4.8 Agent tab 30
- 4.9 Print server tab 32
- 4.10 IPM tab 33
- 4.11 FDT tab 36
- 5 Devices tile 37
- 5.3 Manually add a device 42
- 5.5 Import/Export device data 42
- Figure 5-12 Device install 45
- Model eSF Version 58
- App 1 AC Express 62
- App 5 Card Enroll 62
- Table 5-2 Supported printers 64
- 5.12 Configure XT devices 67
- 6 Print server tile 68
- 7 Server Information tile 69
Relacionado con productos y manuales para Los servidores de impresión HP Access Control
(2 paginas)
(92 paginas)
(100 paginas)Philips 017266693 manuals
Owner’s manuals and user’s guides for Outdoor lighting Philips 017266693.
We providing 1 pdf manuals Philips 017266693 for download free by document types: Datasheet
Comentarios a estos manuales