HP StorageWorks MSA1000 Guía de instalación descargar pdf (Pagina 31)

Installation Procedures - for all MSA1000 Deployments

31MSA1000 Installation Guide

Attach the Mounting Rails to the Rack

The items supplied in the rail kit include:

Converting the Rack Rails for Round-Hole Racks

The rack rails ship configured for square-hole racks, but can be converted for use

in round-hole racks.

To convert the rack rails for use in a round-hole rack:

1. Locate the bag of miscellaneous hardware that ships with the rack rails and

remove the eight round-hole pins.

2. Use a No. 2 Phillips screwdriver to remove the standard pins from the front

and back ends of the rail.

See Figure 3 on the following page for the location of the pins.

Note: Unless you are converting the rails for use in round-hole racks, do not remove

the pins from the ends of the rack rails. These load-bearing pins are designed to fit

through the holes without being removed.

1 Rack rail (left)

2 Rack rail (right)

3 Pins for round-hole conversion

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 111 112

Sin comentarios

HP StorageWorks MSA1000 Guía de instalación Pagina 31