HP StorageWorks MSA1000 Guía de instalación descargar pdf (Pagina 36)

Installation Procedures - for all MSA1000 Deployments

36 MSA1000 Installation Guide

Install the MSA1000 in the Rack

To install the MSA1000 in the rack:

1. Align the MSA1000 with the rails and slide it into the rack.

WARNING: The storage system weight, as assembled for shipping, exceeds

22.7 kg (50 lb). To reduce the risk of personal injury or damage to the

equipment, at least two people are required to lift the storage system during

removal or installation. Install the storage system in the lowest available

position in the rack.

WARNING: Always use at least two people to lift a storage system into the

rack. If the system is being loaded into the rack above chest level, a third

person MUST assist with aligning the system with the rails while the other two

people support the weight of the system.

Caution: To prevent storage system damage and to ease insertion of the

MSA1000 into the rack, support the weight of the MSA1000 and keep it level

when sliding the storage system into the rack.

Figure 8: Installing the MSA1000 in the rack

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 111 112

Sin comentarios

HP StorageWorks MSA1000 Guía de instalación Pagina 36