Hp ProCurve 520wl Wireless Access Point Manual de usuario descargar pdf (Pagina 158)

Command Line Interface (CLI)

Set RADIUS Parameters

Configure RADIUS Authentication server

[Device-Name]>set radiustbl <index> status enable seraddrfmt <ipaddr or name>

ipaddr <RADIUS IP address or name> port <user defined>

ssecret <user defined> responsetm <1 to 10 seconds>

maxretx <0 to 4 times>

[Device-Name]>show radiustbl

Figure C-17 Results of “show radiustbl” CLI command

Enable RADIUS MAC Access Control

[Device-Name]>set radmacaccctrl enable

[Device-Name]>reboot 0

Set MAC Address Format Type

[Device-Name]>set radmacaddrformat <dashdelimited, colondelimited, singledashdelimited,

nodelimiter>

Set Authorization Lifetime (MAC-based authentication only)

[Device-Name]>set radauthlifetm <900-43200 seconds; default is 900>

Enable RADIUS Accounting

[Device-Name]>set radaccstatus enable

[Device-Name]>set radaccinactivetmr <inactivity timer in minutes>

[Device-Name]>show radius

C-22

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 190 191

Sin comentarios

Hp ProCurve 520wl Wireless Access Point Manual de usuario Pagina 158