Hp ProCurve 520wl Wireless Access Point Manual de usuario descargar pdf (Pagina 37)

Getting Started

— Frequency Channel: When Auto Channel Select is enabled, this field is read-only and displays the

Access Point’s current operating channel. When Auto Channel Select is disabled, you can specify the

Access Point’s operating channel. If you decide to manually set the unit’s channel, ensure that nearby

devices do not use the same frequency (unless you are setting up a WDS). Available Channels vary

based on regulatory domain. See

802.11b Channel Frequencies.

— Distance Between APs: Set to Large, Medium, Small, Microcell, or Minicell depending on the site

survey for your system. The distance value is related to the Multicast Rate (described next). In general, a

larger distance between APs means that your clients operate a slower data rates (on average). See

Distance Between APs for more information.

2-11

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 190 191

Sin comentarios

Hp ProCurve 520wl Wireless Access Point Manual de usuario Pagina 37