Hp ProCurve 520wl Wireless Access Point Manual de usuario descargar pdf (Pagina 44)

Advanced Configuration

Figure 4-1 Enter Network Password Screen

5. Click the Configure button located on the left-hand side of the screen.

Figure 4-2 Configure Main Screen

6. Click the tab that corresponds to the parameter you want to configure. For example, click Network to configure the

Access Point’s TCP/IP settings. The parameters contained in each of the configuration categories are described

later in this chapter.

7. Configure the Access Point’s parameters as necessary. After changing a configuration value, click OK to save the

change.

8. Reboot the Access Point for all of the changes to take effect.

4-2

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 190 191

Sin comentarios

Hp ProCurve 520wl Wireless Access Point Manual de usuario Pagina 44