HP ProLiant Generation ML310 Especificaciones descargar pdf (Pagina 44)

Removal and replacement procedures 44

To replace the heatsink:

1. Use the alcohol swab to remove all the existing thermal grease from the processor. Allow the alcohol

to evaporate before continuing.

2. Apply new grease to the top of the processor in one of the following patterns to ensure even

distribution.

CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the

heatsink is removed from the processor after it has been installed.

CAUTION: The heatsink is designed to fit one way in the server. Failure to install the heatsink

properly can result in thermal damage or equipment failure.

CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (in an

"X" pattern).

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 79 80

Sin comentarios

HP ProLiant Generation ML310 Especificaciones Pagina 44