HP 10TB Guía de usuario descargar pdf (Pagina 167)

Restrictions

<enclosure name> must be 1 to 32 characters long and includes all alphanumeric, underscore

(_), and hyphen (-) characters.

SET ENCLOSURE UID

Syntax

SET ENCLOSURE UID { ON | OFF | SLOW | FAST }

Description

Sets the blue enclosure UID. The enclosure has a UID on both the front and rear of the enclosure.

However, the front UID is only lit when enclosure power is on, while the rear UID is only lit when

standby power is on. The Unit Identification LED displays as steady on, off, or one of two blinking

speeds. The system confirms the operation. There is no particular meaning to SLOW or FAST.

Restrictions

Blinking rates are not user definable. SLOW is 1 Hz; FAST is 2 Hz.

SET FACTORY

Syntax

SET FACTORY

Description

Restores configuration settings back to the factory defaults, including deleting any created user

accounts, except for the Administrator password, which remains unmodified. The EM restarts after

restoring the configuration settings. If the enclosure power is on, the iLOs are reset (to force a

refresh of the enclosure information passed to iLO).

Restrictions

None

SET RACK NAME

Syntax

SET RACK NAME "<rack name>"

Description

Sets the user-defined string reported with SHOW RACK NAME command. The system responds with

confirmation of the change. The default (unset by user) rack name is ‘UnnamedRack’.

Restrictions

<rack name> must be 1 to 32 characters long and includes all alphanumeric, underscore (_),

and hyphen (-) characters.

UPDATE IMAGE

Syntax

UPDATE IMAGE { [ FORCE ] <URL> }

Enclosure control 167

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 180 181

Sin comentarios

HP 10TB Guía de usuario Pagina 167