HP 10TB Guía de usuario descargar pdf (Pagina 86)

Removing and replacing the midplane board

Removing the midplane board

1. Verify the failed component as described in “Verifying component failure” (page 82).

2. Power off the system as described in “Powering the system off and on” (page 76).

3. Remove the enclosure from the rack as described in “Removing the system enclosure from the

rack” (page 83).

4. Remove the top back panel by pressing the panel release button and lifting the latch to slide

the top back panel off.

5. Remove all modules from the back of the enclosure.

NOTE: Make a note of all module locations so they can be placed back into their original

locations.

6. Open the release handle (1, Figure 49 (page 86)), and pull up to remove the server interposer

board (2, Figure 49 (page 86)).

NOTE: This step may require significant force to accomplish.

Figure 49 Removing the server interposer board

7. Remove the plug bracket (2, Figure 50 (page 86)) from the coil power plug by removing the

thumbscrew (1).

Figure 50 Removing the plug bracket from the coil power plug

86 Removing and replacing hardware components

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 180 181

Sin comentarios

HP 10TB Guía de usuario Pagina 86