HP StorageWorks 9030 Virtual Library System Manual de usuario descargar pdf (Pagina 218)

DVD-CD Drive

CAUTION: To prevent improper cooling and thermal damage, do not operate the node unless

all bays are populated with either a component or a blank.

1. Power off the node.

NOTE: The ejector button for the CD-ROM drive is recessed to prevent accidental ejection;

it may be helpful to use a small, flat, blunt object, such as a key or pen, to push the ejector

button.

2. Press the ejector button in firmly until the DVD-CD drive ejects (1).

3. Pull the DVD-CD drive out of the node (2).

To replace the component:

1. Carefully align the connector on the rear of the drive with the connector on the DVD-CD drive

interface board.

2. Slide the drive into the bay until it clicks.

Power Supply

CAUTION: To prevent improper cooling and thermal damage, do not operate the node unless

all bays are populated with either a component or a blank.

1. Disconnect the power cord from the power supply.

218 Component Replacement

1 2 ... 213 214 215 216 217 218 219 220 221 222 223 ... 267 268

Sin comentarios

HP StorageWorks 9030 Virtual Library System Manual de usuario Pagina 218