Hp Hitachi Dynamic Link Manager Software Manual de usuario Pagina 232

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 510
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 231
4. HDLM Operation
210
For details on path information, see 6.7 view (Displays Information).
7. Execute the utility for clearing HDLM persistent reservation (
dlmpr) to
clear the reservation of LUs comprising the applicable volume group:
# /usr/DynamicLinkManager/bin/dlmpr -c hdisk-name
hdisk-name ...
8. Execute the following command to activate the applicable volume group:
# varyonvg volume-group-name
After you replace an HBA, any paths that go through that HBA might be removed
(due to AIX specifications) from the paths to a specified boot disk hdisk (logical
device file), which will no longer be recognized as the boot disk. If this happens,
it is necessary to restart the host, and then re-specify the path that goes through
the replaced HBA as a path to the boot disk, as shown in the procedure below.
To re-specify a device called
hdisk10 on the storage system as a boot disk:
1. Execute the following command to restart the host:
# shutdown -Fr
2. Make sure that the boot disk is in a multi-path configuration:
# lspath -l hdisk10 -s available
Available hdisk10 fscsi0
Available hdisk10 fscsi1
...
3. Check the current boot disk list:
# bootlist -m normal -o
hdisk10 blv=hd5
hdisk0 blv=hd5
hdisk1 blv=hd5
...
4. Specify boot disks that are suitable for your host environment:
# bootlist -m normal hdisk10 hdisk0 hdisk1
5. Make sure that the number of configured boot disks is the same as the
number of paths that you checked in step 2:
# bootlist -m normal -o
hdisk10 blv=hd5
Vista de pagina 231
1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 509 510

Comentarios a estos manuales

Sin comentarios