Hp MPX200 Multifunction Router Manual de usuario Pagina 52

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 120
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 51
FC1 advanced info successfully configured
set features
The set features command sets the license key to enable extended features on the router.
Syntax
set features -key=license key
Example
c:\> rcli set features -key=abcdef /ip=10.0.0.12
[10.0.0.12]
FCIP 1Gig Capable Licensed
FCIP SACK Capable No License Needed
DM Offline Capable No License Needed
DM Online Capable No License Needed
DM Capacity Capable 10240 GB Issued, 0 GB Used, 0 GB In-Use
DM Array Capable 9 Array Issued, 1 Used
set iscsi
The set iscsi command sets an iSCSI port configuration.
Syntax
set iscsi
Keywords
Specifies the port number for the iSCSI port that you want to configure.-port=
Specifies the static IPv4 address for the iSCSI port.-ipv4_addr=
Default is the current setting on the router.
Disables use of IPv4 for the iSCSI port.-ipv4_disable
If this keyword is used, all other IPv4-related keywords are ignored.
Default is the current setting on the router.
Specifies the IPv4 subnet mask. Default is the current setting on the router.-ipv4_subnet=
Specifies the IPv4 gateway address for the iSCSI port.-ipv4gw_addr=
Default is the current setting on the router.
Specifies the default router IPv6 address for the iSCSI port.-ipv6_def_addr=
Default is the current setting on the router.
Disables use of IPv6 for the iSCSI port.-ipv6_disable
If this keyword is used, all other IPv6-related keywords are ignored. Default is the
current setting on the router.
Specifies the static global IPv6 address for the iSCSI port.-ipv6_glob_addr=
Auto-config not supported for iSCSI ports.
Default is the current setting on the router.
Specifies the site-local IPv6 address for the iSCSI port.-ipv6_site_addr=
Auto-config not supported for iSCSI ports.
Default is the current setting on the router.
NOTE: Some older router hardware does not support IPv6.
52 Command reference
Vista de pagina 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 119 120

Comentarios a estos manuales

Sin comentarios