Hp MPX200 Multifunction Router Manual de usuario descargar pdf (Pagina 62)

Syntax

set time

Keywords

Specifies that the router time is set using the input treated as Greenwich Mean Time

in the format MM/DD/YYYY HH:MM:SS.

-gmt=

Specifies that the router time is set using the input treated as a local time in the format

MM/DD/YYYY HH:MM:SS.

-local=

Specifies that the router time is set to the same time as is currently on the local system.-use_local_time

Example

c:\> rcli set time -local="07/29/2009 23:26:03"

set vlan

The set vlan command enables or disables the use of a VLAN for a specified IPv4 or IPv6

protocol on a specified iSCSI port. If the VLAN is enabled, this command allows setting the VLAN

ID and priority.

Syntax

set vlan -port=iSCSI port number,

Keywords

Specifies whether VLANs are enabled or disabled for the port.-enable=

• yes

• no

• on

• off

• true

• false

The default is the current setting on the router.

Specifies the VLAN ID number in the range of 1 to 4094.-id=

The default is the current setting on the router.

Specifies to use IPv4.-ipv4

Specifies to use IPv6.-ipv6

Specifies a priority number from 0 to 7, where 7 is the highest priority.-priority=

The default is the current setting on the router.

Only one IP version can be used on the same command line. If not specified, the default is IPv4.

Example

c:\> rcli set vlan -enable=yes -port=1 -ipv4 -priority=2 -id=32

/ip=10.0.0.12

[10.0.0.12]

IPv4 VLAN ENABLED, VLAN ID = 32, VLAN Priority = 2

set vp_group

The set vp_group command sets a display name for a VP group.

62 Command reference

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 119 120

Sin comentarios

Hp MPX200 Multifunction Router Manual de usuario Pagina 62