Hp ProLiant ML310 G3 Data Protection Storage Server Manual de usuario Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 62
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
2 DP Storage Server startu p
Before beginning the startup procedures, verify that the DP Storage Server
is completely installed, and that all cables and cords are connected. Also,
read the supplied documentation before starting. Documents include:
HP ProLiant D P Storage Server installation instructions (for your
model)
HP ProLiant Storage Server administration guide
HP ProLiant Storage Ser ver release notes (available at :
h
ttp://www.hp.com/go/servers)
To start DP Storage Server for the rst time:
Administer the DP Storage Server, page 23
Install the Windows Multilingua l User Interface (MUI)
(optional), page 25
Prepare the DP Storage Server for DPM installation, page 26
Run the DP M mini-setup,page27
Complete additional setup (optional),page30.
Change default storage congurations (optional), page 31
NOTE:
The WebUI is disabled until the DPM mini-setup is complete.
Administer the DP Storage Server
Use one of the followi ng administration methods:
Using the Remote Desktop Connection method , page 23
Using the Direct Attach method, page 24
Using the Integrated Lights-Out (iLO) method, page 25
Using the Remote Desktop Connection method
DP Storage Server ships with DHCP enabled on the network port. If the
system is placed on a D HCP-enabled network and the serial number of the
HP ProLiant D ata Protection Storage Server user guide
23
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 61 62

Comentarios a estos manuales

Sin comentarios