Hp XP Array Manager Software Manual de usuario descargar pdf (Pagina 48)

Figure 25 Flow of Authentication of Fibre Channel Switch

Each case in the ﬂow is explained as follows. Case A to Case D in Figure 25 on page 48 corresponds

that below.

• When pe

rforming authentication of Fibre Channel switches by ports:

• If the user information for the Fibre Channel switch is registered on the port, and authentication

of the Fibre Channel switch is enabled (Case A):

Each port authenticates the Fibre Channel switch. If the authentication of the Fibre Channel

switc

h ends successfully, either of the following actions occurs:

• When the Fibre Channel switch is conﬁgured for mutual authentication, the processing will

go on to authentication of the port.

• When the Fibre Channel switch is not conﬁgured for mutual authentication, the Fibre

Chan

nel switch will connect to the storage system.

If th

e Fibre Channel switch of the port is not conﬁgured for authentication with CHAP, the

auth

entication fails and the Fibre Channel switch cannot connect to the storage system.

• If the user information for the Fibre Channel switch is registered on the port, but authentication

of the Fibre Channel switch is disabled (Case B):

The ports do not perform authentication of the Fibre Channel switch. The Fibre Channel switch

wil

l connect to the storage system without authentication regardless of whether or not the Fibre

Cha

nnel switch is conﬁgured for authentication with CHAP.

• If the user information for the Fibre Channel switch is not registered on the port (Case C):

Performing LUN Manager Operations

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 104 105

Sin comentarios

Hp XP Array Manager Software Manual de usuario Pagina 48