Hp XP Continuous Access Software Manual de usuario descargar pdf (Pagina 177)

Table 41 Config. def. file settings (HORCM_INST) & specif. vals. in NAS Blade system

Specified values in NAS Blade systemItemSection name

Fixed IP address of eth1 or eth2 in the

NAS package in XP Continuous Access

Journal's secondary site

(But if you specify eth1 in HORCM_MON

ip_address, specify eth1. If you

specify eth2 in HORCM_MON

ip_address, specify eth2.)

ip_addressHORCM_INST

20331 (instance number 16) or 20332

(instance number 17)

service

NOTE: You can specify the host name instead of the fixed IP address if the fixed IP address and

the corresponding host name are registered in /etc/hosts, an NIS server, or a DNS server.

See the NAS Blade Manager User's Guide for information about registering the fixed IP address

and the corresponding host name in /etc/hosts and how the NAS Blade system can search

the host name using NIS or DNS.

Table 42 Example 3: XP RAID Manager configuration definition file (for instance number 16)

HORCM_MON

#ip_address service poll(10ms) timeout(10ms)

123.456.78.51 20331 1000 3000

HORCM_CMD

#dev_name dev_name dev_name

#UnitID 0 (Serial# 62486)

/dev/sdf

HORCM_DEV

#dev_group dev_name port# TargetID LU# MU#

# /dev/sdt SER = 62486 LDEV = 10 [ FIBRE FCTBL = 3 ]

VG VG_010 CL1-A-1 0 10

# /dev/sdu SER = 62486 LDEV = 64 [ FIBRE FCTBL = 3 ]

VG VG_011 CL1-A-1 0 11

# /dev/sdv SER = 62486 LDEV = 12 [ FIBRE FCTBL = 3 ]

VG VG_012 CL1-A-1 0 12

# /dev/sdw SER = 62486 LDEV = 66 [ FIBRE FCTBL = 3 ]

VG VG_013 CL1-A-1 0 13

HORCM_INST

#dev_group ip_address service

VG 123.456.80.51 20331

VG 123.456.80.115 20331

Checking the contents of the XP RAID Manager configuration definition file

By combining the following commands, you can check whether an appropriate LU is specified in

the HORCM_DEV section in the XP RAID Manager configuration definition file.

First, start XP RAID Manager in both the NAS package in which the XP Continuous Access Journal

P-VOL is connected and in the NAS package that uses the S-VOL (see Table 43 (page 178)).

Preparing for XP Continuous Access Journal operations 177

1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 214 215

Comentarios a estos manuales

Sin comentarios

Hp XP Continuous Access Software Manual de usuario Pagina 177

Comentarios a estos manuales

Relacionado con productos y manuales para Almacenamiento Hp XP Continuous Access Software