HP EliteDesk 705 G3 Small Form Factor PC Manual de usuario descargar pdf (Pagina 12)

Removing the computer access panel

To access internal components, you must remove the access panel.

1. Remove/disengage any security devices that prohibit opening the computer.

2. Remove all removable media, such as compact discs or USB ash drives, from the computer.

3. Turn o the computer properly through the operating system, and turn o any external devices.

4. Disconnect the power cord from the AC outlet and disconnect any external devices.

IMPORTANT: Regardless of the power-on state, voltage is always present on the system board as long

as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage

to the internal components of the computer.

5. If the computer is on a stand, remove the computer from the stand and lay the computer down.

6. Pull up the access panel handle (1), and then lift the panel o the computer (2).

6 Chapter 2 Hardware upgrades

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 59 60

Sin comentarios

HP EliteDesk 705 G3 Small Form Factor PC Manual de usuario Pagina 12