HP EliteDesk 705 G3 Small Form Factor PC Manual de usuario descargar pdf (Pagina 9)

Rear panel components

1 PS/2 mouse connector (green) 7 PS/2 keyboard connector (purple)

2 Serial port 8 DisplayPort monitor connectors

3 RJ-45 (network) jack 9 VGA monitor connector

4 USB 2.0 ports (black) with keyboard wakeup

function

10 USB 3.1 ports (blue)

5 Audio-in jack (blue) 11 USB 3.1 ports (blue)

6 Power cord connector 12 Audio-out jack for powered audio devices

(green)

NOTE: An optional second serial port and an optional parallel port are available from HP.

If using a USB keyboard, HP recommends connecting the keyboard to one of the USB 2.0 ports with the wakeup feature. The

wakeup feature is also supported on the PS/2 connector if enabled in BIOS F10 Setup.

When a device is plugged into the microphone/headphone jack, a dialog box will pop up asking if you want to use the jack for a

microphone or a headphone. You can recongure the jack at any time by double-clicking the Audio Manager icon in the

Windows taskbar.

When a graphics card is installed in one of the system board slots, the video connectors on the graphics card and/or the

integrated graphics on the system board may be used. The specic graphics card installed and software conguration will

determine the behavior.

The system board graphics can be disabled by changing settings in BIOS F10 Setup.

Rear panel components 3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 59 60

Sin comentarios

HP EliteDesk 705 G3 Small Form Factor PC Manual de usuario Pagina 9