HP EliteDesk 705 G3 Small Form Factor PC Manual de usuario descargar pdf (Pagina 43)

Installing a 2.5-inch hard drive

1. Remove/disengage any security devices that prohibit opening the computer.

2. Remove all removable media, such as compact discs or USB ash drives, from the computer.

3. Turn o the computer properly through the operating system, and turn o any external devices.

4. Disconnect the power cord from the AC outlet and disconnect any external devices.

CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as

the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to

the internal components of the computer.

5. If the computer is on a stand, remove the computer from the stand.

6. Remove the computer access panel.

7. Install four black and blue M3 mounting screws (two on each side of the drive).

NOTE: M3 metric mounting screws can be purchased from HP.

When replacing a drive, transfer the four mounting screws from the old drive to the new drive.

8. Rotate the drive cage to its upright position.

Removing and installing drives 37

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 59 60

Sin comentarios

HP EliteDesk 705 G3 Small Form Factor PC Manual de usuario Pagina 43