HP RP7 Retail System Model 7100 Manual de usuario descargar pdf (Pagina 24)

2. Unplug the white connector (1), and remove the two screws (2) securing the battery holder.

3. Carefully lift out the gold contacts circuit (1), and remove the battery holder cap while letting the white

connector pass through the hole (2) in the battery holder (as shown below).

4. Remove the old battery from its place (if present), and insert the new battery in the same position.

5. Replace the battery holder cap, plug in the connector and return the contacts circuit to its previous

location.

NOTE: When inserting the new battery into the handle, take care to position the battery and the

connector as described above.

6. Insert the cover in the handle and screw it back into place.

18 Chapter 4 Setting up and using the scanner

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 37 38

Sin comentarios

HP RP7 Retail System Model 7100 Manual de usuario Pagina 24