HP RP7 Retail System Model 7100 Manual de usuario descargar pdf (Pagina 37)

LED and beeper indications

The scanner’s beeper sounds and its LED illuminates to indicate various functions or errors on the scanner. An

optional “Green Spot” also performs useful functions. The following tables list these indications. One

exception to the behaviors listed in the tables is that the scanner’s functions are programmable, and so may

or may not be turned on. For example, certain indications such as the power-up beep can be disabled using

programming barcode labels.

Indicator Description LED Beeper

Power-up beep The scanner is in the process of

powering up.

N/A Scanner beeps four times at

highest frequency and volume

upon power-up.

Good read beep A label has been successfully

scanned by the scanner.

LED behavior for this indication

is congurable via the feature

“Good Read: When to Indicate”

(see the HP Wireless Barcode

Scanner Programming

Reference Guide for

information).

The scanner will beep once at

current frequency, volume,

mono/bitonal setting and

duration upon a successful

label scan.

ROM failure There is an error in the

scanner's software/

programming.

Flashes Scanner sounds one error beep

at highest volume.

Limited scanning label read Indicates that a host

connection is not established.

N/A Scanner 'chirps' six times at the

highest frequency and current

volume.

Scanner active mode The scanner is active and ready

to scan.

The LED is lit steadily

N/A

Scanner disabled The scanner has been disabled

by the host.

The LED blinks continuously N/A

Green spot

ashes

momentarily

Upon successful read of a label,

the software shall turn the

green spot on for the time

specied by the congured

value.

N/A N/A

Image capture When ready to capture image. Blue light ashes 2 times when

updating

N/A

Except when in sleep mode or when a good read LED duration other than 00 is selected

Programming mode - The following indications ONLY occur when the scanner is in Programming mode.

Indicator Description LED Beeper

Label programming mode entry A valid programming label has

been scanned.

LED blinks continuously Scanner sounds four low

frequency beeps.

Label programming mode

rejection of label

A label has been rejected. N/A Scanner sounds three times at

lowest frequency and current

volume.

Label programming mode

acceptance of partial label

In cases where multiple labels

must be scanned to program

one feature, this indication

acknowledges each portion as

it is successfully scanned.

N/A Scanner sounds one short beep

at highest frequency and

current volume.

LED and beeper indications 31

1 2 ... 32 33 34 35 36 37 38

Comentarios a estos manuales

Sin comentarios

HP RP7 Retail System Model 7100 Manual de usuario Pagina 37

Comentarios a estos manuales

Relacionado con productos y manuales para Lectores De Códigos De Barras HP RP7 Retail System Model 7100