Hp Multi-Site Traffic Director sa9200 Manual de usuario Pagina 105

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 208
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 104
C H A P T E R 6 System Commands
99
Config Sys SNMP Commands
config sys wizard
Changes the prompt level to the config sys wizard branch.
info
Displays information about whether the Wizard is enabled or
disabled. By default, Wizard is enabled.
enable
Enables the Quick Start Wizard. The Quick Start Wizard is an
automated, interactive method to configure the SA9200. It is
available only through the serial port if enabled after Boot
Monitor.
disable
Disables the Quick Start Wizard.
Command Description
Config Sys Commands
Command Description
config sys snmp
Changes the prompt level to config sys snmp.
info
Displays information about SNMP agent port, sysContact,
sysName, sysLocation and auto-topology
port
Allows you to specify the port on which the SA9200 receives
SNMP requests.
Syntax:
config sys snmp port <agentport>
where agentport is a number between 5020 and 65535 (the
default is 161)
auto-topology
Enables or disables operation of the auto-topology protocol. The
default is
disable.
Syntax:
config sys snmp auto-topology [enable|disable]
sysContact
Allows you to specify a value for the MIB-II variable sysContact.
The default is null.
Syntax:
config sys snmp sysContact <string>
where string is a string of displayable characters.
Config Sys SNMP Commands
Vista de pagina 104
1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 207 208

Comentarios a estos manuales

Sin comentarios