Hp Multi-Site Traffic Director sa9200 Manual de usuario descargar pdf (Pagina 179)

Cleaning the Dust

Filter

The HP Multi-Site Traffic Director Server Appliance SA9200 has a

dust filter element mounted behind the front grille and in front of the

dual intake fans. This filter is washable and should be cleaned every

six months at a minimum. If you use your SA9200 in an abnormally

dusty environment, clean the filter more often. You need not interrupt

SA9200 operation to perform the following cleaning procedure.

To clean the filter:

• Remove the two Phillips screws that secure the metal grille on

the left side of the front panel. Remove the grille to expose the

foam filter element.

• Remove the filter element from its recess. It is recommended that

you replace the grille and its screws while the filter element is

being cleaned.

• Wash the filter in warm water and set aside to dry.

Allow the filter to dry thoroughly before reinstalling in the SA9200.

• When the filter element is dry, remove the front grille and replace

the filter in its recess, assuring that its entire perimeter is behind

the metal lip of the recess.

• Reinstall the grille with its two Phillips screws.

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 207 208

Sin comentarios

Hp Multi-Site Traffic Director sa9200 Manual de usuario Pagina 179