Hp Multi-Site Traffic Director sa9200 Manual de usuario Pagina 29

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 208
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 28
C H A P T E R 3 Configure DNS Servers
23
Multiple-VIP
Response
A DNS response may contain multiple answers. A standby VIP is
automatically considered as a response if it is marked IN USE due
to a failed VIP. When multi-VIP standby is enabled, standby VIPs are
included in a response if the number of additional VIPs in the
response has not been met
1
. To include standby VIPs, type config
dns zones <zonename> hostnames <hostname> multi-vip-
standby enable.
HP SA9200#config dns zones somedomain.xyz-
ex.com hostnames www multi-vip-standby enable
The number of additional answers in a response can be configured.
The range is from 0 to 15.
HP SA9200#config dns zones somedomain.xyz-
ex.com hostnames www add-rec-responses 4
To verify whether multi-VIP standby is enabled or check the number
of additional responses, type config dns zones
<zonename> hostnames <hostname> info.
HP SA9200#config dns zones somedomain.xyz-
ex.com hostnames www info
1.
If multi-VIP standby is enabled when using the Flash load balancing method,
standby VIPs from a site are not included if all of the VIPS are (1) standby and,
(2) not marked IN USE due to a failed VIP at another site.
Vista de pagina 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 207 208

Comentarios a estos manuales

Sin comentarios