Hp Netserver L Server series Manual de usuario descargar pdf (Pagina 21)

Chapter 3 Removing and Replacing Covers

Figure 3-4. Removing the HP NetServer LH 3r Bezel

CAUTION Do not unscrew the NetServer from the rack until you have

extended the anti-tip foot from under the front of the rack.

This anti-tip device must be extended to prevent the rack and

NetServer from tipping over, which could damage the

NetServer and injure people.

If it is secured to the rack, unscrew the NetServer chassis from the rack, as shown

in Figure 3-5. Do not unscrew the entire hinge or bracket from the chassis;

remove only the outer screws, so the hinge and the bracket remain attached to the

NetServer chassis. Pull the NetServer forward from the rack until the lockout

device engages with a click.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 153 154

Sin comentarios

Hp Netserver L Server series Manual de usuario Pagina 21