Hp Netserver L Server series Manual de usuario Pagina 12
- Pagina / 146
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 1 Controls, Ports and Indicators
6
Applying Power to the HP Netserver
Powering-Up the HP Netserver
1. Turn on power to the monitor connected to the HP Netserver.
Turning on the monitor first ensures that video output auto-configures
properly as the Netserver boots up.
2. Press the Power push-button on the front control panel. See Figure 1-1.
When you press the power button, the Netserver powers up and loads the
operating system. The system runs a set of power-on self tests (POST) during
this process. For details refer to Chapter 12, "Troubleshooting."
Powering-Down the HP Netserver
1. Log off all users and, if necessary, back up files.
a. Schedule the power-down for a time when the Netserver being down will
affect the fewest users.
b. If you will be performing a hardware or software upgrade, ensure the
Netserver's data has been backed up.
c. Follow instructions in your network operating system (NOS)
documentation to shut down all networking software and applications.
WARNING The power supply will continue to provide standby current to
the Netserver until the power cable is disconnected from the
rear panel.
2. Press the power switch on the HP Netserver control panel when prompted by
the operating system.
Normally this completes the power-down procedure.
- HP Netserver LP 2000r 1
- User Guide 1
- (1.13 and 1.26 GHz) 1
- Audience Assumptions 2
- Contents 3
- Front Panel 7
- LED ICON Description 9
- Rear Panel 10
- Powering-Up the HP Netserver 12
- Sleep States (ACPI) 13
- Netserver 15
- Replacing the Front Bezel 16
- Removing the Top Cover 16
- Replacing the Top Cover 17
- Air Flow Guide 19
- Removing the PCI Card Cage 20
- Replacing the PCI Card Cage 21
- Boot Priority 25
- Hardware Mirroring 26
- Top Connector 34
- Bottom Connector 34
- Installing Additional DIMMs 38
- Removing DIMMs 42
- IRQ Settings 46
- I C Connector 47
- Integrated 48
- RA Board 48
- Connector 48
- Removing an Accessory Board 53
- Primary Processor (CPU1) 56
- Secondary 56
- Processor 56
- ZIF Lever 59
- Terminator 59
- Installing the Heatsink 61
- (4-Post) 67
- Marking Rack Columns 71
- Anti-tip Foot 72
- Extended 72
- Screws (4) 72
- (2-Post) 81
- Preparing the HP Netserver 86
- Mouse, and Power Supplies 93
- Release Lever 96
- HP Management Solutions 101
- DiagTools 102
- Setup (BIOS) Utility 102
- Accessing the Setup Utility 103
- Menu Bar 103
- Using the Setup Screens 104
- ➢Power-On Password 106
- ➢Hardware Security 106
- SCSI Configuration Utility 107
- Overview 109
- 12 Troubleshooting 111
- Common Installation Problems 112
- Netserver Will Not Power On 113
- Chapter 12 Troubleshooting 114
- Resetting a Lost Password 116
- Hardware Problems 117
- CD-ROM Drive Does Not Work 118
- SCSI Device Does Not Work 118
- Replacing a Battery 119
- Introduction 121
- Tools Required 123
- Rack Configuration Tools 123
- Safety Precautions 124
- Marking the Columns 125
- See Figure 13-5 128
- Attaching the Front Bezel 131
- Cabling Rack Components 132
- A Specifications 135
- Appendix A Specifications 136
- System Board Layout 138
Relacionado con productos y manuales para Hardware De La Computadora Hp Netserver L Server series
(213 paginas)Philips 017266693 manuals
Owner’s manuals and user’s guides for Outdoor lighting Philips 017266693.
We providing 1 pdf manuals Philips 017266693 for download free by document types: Datasheet
Comentarios a estos manuales