Hp Netserver L Server series Manual de usuario Pagina 64

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 146
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 63
Chapter 6 Installing an Additional Processor
58
Removing a Processor and Heatsink
Use this procedure to remove a processor and its heatsink (the heatsink must be
removed before the processor).
CAUTION Take the following precautions when removing processors:
Wear an anti-static wrist strap and use a static-dissipating
work surface or grounding mat connected to the chassis
when handling components.
Before removing the processor, touch a grounded
unpainted metal surface on the HP Netserver to discharge
static electricity.
1. Remove the air flow guide. See Chapter 2, "Opening and Closing the HP
Netserver."
2. Use a flathead screwdriver or similar tool to unhook the tool latch on the
heatsink. See Figure 6-6.
Tool
Latch
Figure 6-6. Removing the Heatsink
Vista de pagina 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 145 146

Comentarios a estos manuales

Sin comentarios