Hp Netserver L Server series Manual de usuario Pagina 34

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 146
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 33
Chapter 3 Installing Mass Storage Devices
28
BACKPLANE A
BACKPLANE B
SCSI Channel A
SCSI Channel B
Cable B
(Cable A Removed)
Cable C
External
SCSI
SCSI 3
SCSI 4
SCSI 5
SCSI 0
SCSI 1
SCSI 2
SCSI Terminator
Cable A = External SCSI Cable
Cable B = Short Internal SCSI Cable
Cable C = Long Internal SCSI Cable
Rear
Front
Top Connector
Top Connector
Bottom Connector
Bottom Connector
Figure 3-8. Duplexing Using Internal SCSI Cables
Duplexing with a SCSI Host Bus Adapter Card
Follow these steps to duplex the SCSI hard drives using a SCSI Host Bus Adapter
card (see Figure 3-9).
1. Disconnect Cable B from SCSI Channel A (on the system board), and
connect it to Channel 0 on the SCSI host bus adapter card.
Ensure the cable is not looped at the Channel 0 connection. The cable
should appear as shown in Figure 3-10.
2. Disconnect Cable C from the bottom connector of Backplane A and
connect it to Channel 1 on the SCSI Host Bus Adapter card.
Ensure the cable is not looped at the Channel 1 connection. The cable
should appear as shown in Figure 3-10.
3. Plug a SCSI terminator into the bottom connector on Backplane A and
Backplane B.
Vista de pagina 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 145 146

Comentarios a estos manuales

Sin comentarios