Hp ProLiant BL660c Gen8 Server Blade Manual de usuario descargar pdf (Pagina 14)

Operations 14

Remove the access panel

To remove the component:

1. Power down the server blade (on page 12).

2. Remove the server blade (on page 13).

3. Press the access panel release button.

4. Slide the access panel towards the rear of the server blade, and then lift to remove the panel.

Remove a drive

1. Back up all server blade data on the drive.

2. Remove the drive.

Removing DIMM baffles

CAUTION: To avoid damage to the server blade and the enclosure, install all DIMM baffles in

the proper location after adding or replacing DIMMs. DIMM baffles that are missing or installed

incorrectly can compromise server blade and enclosure cooling.

The server blade contains three DIMM baffles.

Remove the center DIMM baffle

To remove the component:

1. Power down the server blade (on page 12).

2. Remove the server blade (on page 13).

3. Remove the access panel (on page 14).

4. Disconnect any cables that may be routed across the DIMM baffle.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 81 82

Sin comentarios

Hp ProLiant BL660c Gen8 Server Blade Manual de usuario Pagina 14